my 68 automag classic will not fire, i pull the trigger and a little air comes out and the trigger returns with barely no pressure..i have a near sear assembly, and my on/off does not look stock. i set up lvl 10 correctly, i watched all the videos etc...does anyone else think that it is the on/off assembly problem?
-
-
try to turn up the velocity and if that doesnet work then make sure your carrier and o-ring are not to tight. it might be bolt stick and make sure you have the smallest spring in. i would try to turn up the velocity frst.My Guns: chrome and black pump mag
-black 2k sniper 2
-32* vision imp with ups, ECS, reloader B
-was'd imp w/ i-frame and all ups, warp feed
-88/3000 and 48/3000 tanks
AIM: Paintball1084
my feedback -
My advice would be to go up a carrier size, and turn up your velocity. Check to make sure that your velocity isn't too low, then make sure you have the right size carrier in there.
Sponsers
Wone Concepts
Titanium Paintball
Predators denGloss Black ULE E-Mag
ULE Body
ULE Rail
CNC Battery Housing
Longbow Barrel Kit
Back 2k3 Shocker
( ( ( O ) ) )
Comment
Comment