Matrix LED to LCD conversion, have the parts, can't get it to work.

[RT pRo AuToMaG]

Ok, my LED noid burnt out the other day, so I decided to go LCD and ordered an LCD noid and board. Problem is, the new noid has nowhere to plug in a battery. If someone could just send me a pic of their LCD board or explain to me how to make it work, I will greatly appreciate it.

[AkumA]

and you call yourself the "(un)official Matrix Tech"? ok posser. (yes, i've owned a matrix and know what you're talking about).

i had a LED, planed on converting to an LCD. involved too much money for me. check up www.matrixowner.com, not here dude

[Tracker]

the wires that run off the soleniod are different from an led, if you have the lcd soleniod, and the lcd board, and the proper wiring harness for the soleniod, then you should have everything required, if all else fails call matrix owner, they are nice and helpfull people, and they will solve your problem

and how the hell did you burn out a soleniod? i have had my matrix for almost 3 years now, and 1 soleniod got the brunt of the labor, and the only reason i replaced it was because i broke my 9v connector, and then i pulled a wire out of the plug while i was stripping the wire to solder on a 9v clip (when you call see if they will send you an led wiring harness, unless you wanna give me your old one )

Tracker

[RT pRo AuToMaG]

lol, should have posted back, later that night I cut the battery connector slots off the led noid (2 holes at the very end) and plugged them to the lcd board. This is my cousins gun, and the airsmith at the field (a certified matrix tech) told him that his noid was fried. Well, we changed out ever part in the gun except for the bolt itself (got an aardy red bolt kit but it didn't come with the bolt, only all the parts). So it has to be the bolt that is busted (and I don't know how, it looks fine, must be out of spec.) Thanks for the help though.