I hate my xvalve

[The Deacon]

my theory that no gas was getting to the valve just got shot in the butt.

I gassed it up w/ the valve out of the gun, it leaked "down the barrel" so that was good, and I let off of the on/off and it shot out, so that's good. The pin is not popping out like it should however.

I'm going to stick the stock on/off back in and see what happens.

[PBCapo]

holy crap deacon ur scaring me, same exact. I cant unscrew the reg from the valve, and the ult was hard to get out after i put it in, it took me like 10 minutes with a little nail file thing. however, the lines on the bottom do line up for me. Did your valve work before you bought the ult? what is the serial number on your valve?

[coolcatpete]

Turn the velocity up until it leeks out of the back of the x-valve, then turn it back down until it stops. This worked for me when I got mine. I had all the same problem except for the dropping. If this doesnt work PM me I will think of something.
Pete

[PBCapo]

i cant put the stock on/off back in because i lost that damn oring

[The Deacon]

never worked, not even w/ the stock on/off. serial is: vv03684. WHY WON'T IT WORK?!?!??!?

[The Deacon]

veloc up and down doesn't do anything. can you unscrew your reg from the valve, pbcapo?

[PBCapo]

someone help me and deacon, this sucks

[cphilip]

Thats not in the least all I told you to do. And you seem to have failed to mention some stuff here that you did before you contacted me. Go back and reveiw. I told you a entire proceedure of things to do. And you never came back to me with anything after that.

[coolcatpete]

May be a stupid question but How much air does your tank have in it
Pete

[The Deacon]

mine has roughly 700 psi, not enough to fire the gun, but should be plenty for some trigger pressure at least.

[coolcatpete]

Turn your velocity all the way upand if it does not work just keep turning it until you get a little preasure and fill you tank. It all happened to me. You probaly also want to call the tech line.
Pete.

[PBCapo]

i did turn the velocity up and got the leak as mentioned before. I just gassed the valve only up, and the bolt shot across the room, i think that was supposed to happen, and the ult came out of the valve a bit, but didn't shoot out, is that all normal?

[The Deacon]

exact same thing that happened to me capo, just make sure not to have the bolt in next time,

[coolcatpete]

Originally posted by PBCapo
okay, i gassed it up, turned the velocity up a crapload, and after a while it suddenly started leaking down the barrel, a lot of gas came through

You said it leaked down the barrel, it could be your LX leaking but when you turn you velocity up to much it should leak out of the back of the reg.
PEte

[The Deacon]

Mine doesn't leak, period. Nowhere, no how.