List of what the 3.2 software does

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Halliday
    Level 10
    • Oct 2000
    • 1655

    #1

    List of what the 3.2 software does

    I now have a 3.2 E-Mag, but I don't know what all the settings do.

    Can someone give me a list of all settings and what they affect?


    Super Moderator at Pbreview.com
  • rikkter
    • Jun 2002
    • 1804

    #2
    well
    TS-total shots, dur

    SPS-shots per second, dur

    ACE 0, 1, 2 - 0 is off, 1 is one color tone paint, 2 is two color tone paint(so i believe)

    SHBF - shot buffering- this is the main feature, it'll 'remember' a trigger pull within the desired MS(4-100 on gun) after the previous trigger pull, then fire it as soon as it can
    a neat thing to do, is set it to 100, then try to walk the trigger when the SPS is set to 8. see how well you do, then set the SHBF to 4, then walk it on 8 again, it'll give you an idea

    TRG- this is the trigger adjustment mode, when its on, pull trigger and the OFF will turn to a ON. it allows you to adjust the trigger without firing the gun or adding shots to the shot counter

    and thatsss it
    viking #619

    Comment

    • Halliday
      Level 10
      • Oct 2000
      • 1655

      #3
      Exactly what I needed. Thanks.

      SPS: As in, "You can shoot # many times per second" or "You have shot this # per second?" Is it a cap or a counter?


      Super Moderator at Pbreview.com

      Comment

      • Dayspring
        aka- The Day Wang

        • May 2001
        • 9664

        #4
        It's the cap to how fast the board will allow the gun to cycle.

        It's not a ROF counter.

        Comment

        • Branchvillian
          The one with the E-Mag
          • Aug 2003
          • 775

          #5
          I'm confused about my shot buffering. If I was to set it to 100, it would put more shots in-line, assuming I pulled some shots too fast? So 100 would be good, right?

          Sponsers
          Wone Concepts
          Titanium Paintball
          Predators den
          Gloss Black ULE E-Mag
          ULE Body
          ULE Rail
          CNC Battery Housing
          Longbow Barrel Kit

          Back 2k3 Shocker
          ( ( ( O ) ) )

          Comment

          • Miscue
            Super Moderator

            • Oct 2000
            • 7105

            #6
            Originally posted by Branchvillian
            I'm confused about my shot buffering. If I was to set it to 100, it would put more shots in-line, assuming I pulled some shots too fast? So 100 would be good, right?
            No. Only one ball can be buffered. The SHBF setting has some relationship with when the trigger can be observed for the next shot.

            Comment

            • Halliday
              Level 10
              • Oct 2000
              • 1655

              #7
              So if the SHBF is set to "100" it will remember any trigger pulls with in the 100 milisecond time frame and shoot it when that time is up?

              The SHBF relates to bounce right? Higher number = less chance of bounce?


              Super Moderator at Pbreview.com

              Comment

              • Miscue
                Super Moderator

                • Oct 2000
                • 7105

                #8
                Originally posted by Halliday
                So if the SHBF is set to "100" it will remember any trigger pulls with in the 100 milisecond time frame and shoot it when that time is up?

                The SHBF relates to bounce right? Higher number = less chance of bounce?
                What it means is, if you pull the trigger and pull it again in 99ms... you get 1 shot. If you do it in 100ms, you get two shots. Well, roughly. That's how it is supposed to work.

                Personally, I would ignore the SHBF setting - it's almost pointless with how it was implemented in 3.2... just set it low and that's it. After studying the source code, I'd say it is more of an extension to pre-existing debounce code from previous versions, than it is an actual debounce setting. The lower you tune it, the more it becomes like a sandbox setting that doesn't really do anything... which I think defeats the purpose of having that setting to begin with.

                Comment

                • Halliday
                  Level 10
                  • Oct 2000
                  • 1655

                  #9
                  Ok, so set for something like "10?" There's no way I'll pull twice in 10ms. The SHBF tells the software when to be reset for antother shot?


                  Super Moderator at Pbreview.com

                  Comment

                  Working...