new xmag fast firering trouble

[Tarfu]

I bought a xmag got the 2.4 version of software

I experience some trouble in fast firering in the middle of a 15 shot burst I ear a shhhhhhh , but the bolt does not stick I can fire another good shot after it! I tried different velocity, different air system, different carrier, add- remove shim..... IM PISSED

my bros bought a xmag 2 month after me and receive version 3.2 an He have no trouble and shot like hell ...crazy ****!

[rikkter]

uhmm, thats the level 10 kicking in lol
if it didn't go SSSSSSHHHh you'd be going ARGHHH for cleaning the gun so much

[Tarfu]

But the 15 bust shots is in dry firering situation (no paint in the gun)

[rikkter]

your tank may not be keeping up. i had this problem when the input was lower than what i should of had it

[Tarfu]

got a ACI bulldog at preset 800psi and yes it was full at least it was more than 1000psi inside:)

[rikkter]

give it a nice good cleaning, as in all fittings and such off and make sure their all clean

[athomas]

If the tank gauge read 1000psi, it may actually be lower than that. I have to agree with the statement that your ACI tank may not be keeping up with the valve, especially if the tank is a bit low on air. The lower air pressure reduces the available air flow through the regulator on the tank.

[nerobro]

Bulldogs are not the best regs in my experience.... a crossfire, hyperflow, or flatline will solve your problems.

[abunkerer]

i have the same prob. i got a dye throttle, and i dont think that it can keep up