On/off valve problem! I need help!

[Joe2002]

I am having a huge problem with my automag that I can't seem to figure out. When I screw in a normal CO2 tank, the gun only partially pressurizes. Normally the triggure will pressurize allowing me to fire. Now, the trigger only is about halfway compressed forward. I have cleaned and replaced o rings and I don't know what to do anymore. The gun won't fire like this. If anyone has any answers please email me at [email protected].
Thanks Joe Gardner

[virus]

welp this has to be asked....
is the tank full
does it have a on/off valve on it
have you tried a different tank
in the ASA is the part that pushes the pin in a on teh tank damaged in anyway
in the pin on the tank bent, even a little


also something to try when putting the tank on pul and hold the trigger untill you have it on all the way, then quickly release the trigger...
also make sure that the bolt it all the way back if it (the trigger rod) still wont return to it normal position.... if you are able to push the bolt back then it is a different problem with a different fix