lvl 10 (small Problem)

[BD_Paintball]

i have had my lvl 10 for a long time and i have started to get a very small leak out the barrel. its not the carrier because i had a the smallest one in with the smallest o-ring so its very tight. i dont know if the carrier o-rings are bad. i have used them all so they are worked in and the only way to get them so they dont leak alot is to use the smallest one or the one with one dot. any help would be good. so no matter what carrier o-ring with the smallest carrier i have in it still leaks a little bit

and if it is the carrier o-rings if some one has a few extra they want to sell or give to me that would be very cool

thanks

[Tunaman]

Got shims in there? If so, take them out and see if it goes away. Always install the carriers with no shims at first to determine if you have a "Carrier leak", or a "shim leak".

[BD_Paintball]

all the shims are out. and i have tuned a few lvl 10s but i dont know why its leaking. unless its just teh carriers are to old.

[athomas]

Maybe the sear is worn a bit. This would allow the bolt to sit farther forward and possibly the vent hole is slightly ahead of the carrier o-ring.