Well I just got a automag yesterday and gased it up. Well it ran amazingly smooth for around 30-40 shots then the sear didn't return to it's normal position thus making the gun unable to shoot. So, I took it apart and fixed the sear and when I gased it up again it was leaking through the asa or expansion chamber elbows and I can't figure out what the problem is. Can someone help me?
-
-
sounds like you need to put some locktite(the blue NOT the red. RED locktite is the devil!! remember that always!)or some teflon tape on the asa threads to keep them from leaking.
-
Or you could just use teflon tape, that's probably more convenient than finding loctite...unless you already have some.
Sponsers
Wone Concepts
Titanium Paintball
Predators denGloss Black ULE E-Mag
ULE Body
ULE Rail
CNC Battery Housing
Longbow Barrel Kit
Back 2k3 Shocker
( ( ( O ) ) )
Comment
-
Blue or red
You cant just say blue or red...there are many different loctites. Loctite is a company that makes different kind of glues, some of which are impossible to get apart once they harden...you dont want that. I use A red loctite, sorry cant remember the number of it, and it works fine. There are other kinds that will screw everything up. If you want to I can find out the number to the loctite I'm using.Comment
-
well I tought I fixed it but when I gased it up the macroline shot off the gun like a dart. How do I fix that?Comment
-
wut are ss lines? nvm scratch that I'm really tired and can't think straight cuz I just got back from playin paintball (with someone else's gun though)
Last edited by SHOCKandAWE; 01-10-2004, 06:15 PM.Comment
Comment