electric mode help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • MrSprinkles
    Registered User
    • Jan 2004
    • 12
    #1

    electric mode help

    Hey, the electric mode on my Emag is f'ed royaly... lol ok here is what happens, I gas up my gun and put it on electric. I can fire it like 2 - 3 times then it wont let me fire anymore!!! I have 0 clew why! My battery is 100% charged and I can still look at my display but it wont fire on electric! I can fire it on manual but that is it....
    Tags: None
    • Mag_SEAL-6
      #2
      I don't know that much about emags, but have a very slight knowledge. Does your solenoid click or does it just not register at all? Does your led in your grip panel light up when you shoot and it doesn't work? Or your plunger may have something wrong with it.

        Comment

        • Havoc_online
          www.havoc-online.com
          • Feb 2002
          • 2851
          #3
          http://www.havoc-online.com/11544/11699.html


          see if section 11 will can help you



          (it better! )



          :-p
          www.havoc-online.com <--- Your AGD Lifeline

          Products & Services

            Comment

            • MrSprinkles
              Registered User
              • Jan 2004
              • 12
              #4
              that is part of the problem. when I pull the trigger the solenoid clicks for the first like 3 shots then it doesn't! I turn it off for a while and then come back and fire and I can do it like 3 more times then it doesn't click anymore

                Comment

                • athomas
                  Of course it works-its AGD
                  • Jan 2002
                  • 8039
                  #5
                  Take the valve out of the gun. Reach in the body with your finger and push down the back of the sear where the on/off pin hits it. Now fire the gun electronically. Does it push against your finger every cycle? Or does it stop after 3 shots like before?

                  Have you adjusted your trigger magnet lately?
                  Except for the Automag in front, its usually the man behind the equipment that counts.

                    Comment

                    • MrSprinkles
                      Registered User
                      • Jan 2004
                      • 12
                      #6
                      it shoots once then it wont keep going but I can push it down and it will shoot again then I have to push it down again to shoot again,I think the solenoid is F'ed

                        Comment

                        • athomas
                          Of course it works-its AGD
                          • Jan 2002
                          • 8039
                          #7
                          That's normal. The on/off provides the push during normal operation.

                          Now, why isn't the on/off pushing the sear down. Two things can cause that. 1) The bolt is sticking or 2) the on/off is sticking.

                          First choice is to completely clean and check the on/off assembly. Then check the operation of your level 10.
                          Except for the Automag in front, its usually the man behind the equipment that counts.

                            Comment

                            • xrancid_milkx
                              #8
                              Sounds like your on/off is sticking. Do you have the quad o-ring for your on/off assembly? Its black and needed in E-Mags due to the short on/off pin (check your pins length as well, should be .712 I believe) or else it will cause sticking issues.

                                Comment

                                Previous template Next
                                Working...