Ok here is my problem, when my hopper starts feeding balls into the warp they stop and don't actually go into it. I can press the little white switch and they feed into it okay but they won't go on htere own I have to press the switch. If anyone can help me it would be appreciated.
-
-
if I follow you right you expect the warp to feed balls when you are not fireing, or anything? If that is true, a warp will not do that. The white button is used to "prime the warp" load the balls from the hopper and force them into the breech. then when shoot the marker either motion or intellifeed ativates the warp to make it spin and load balls into the breech. You can do what you want by adjusting the sensitivity pot (blue plastic screw) until it runs all the time, but your batterys wont last and you will really smoke your belt.
to make this short, the warp is working fine -
Ok thanks alot kind of feel kind of stupid now but I was just trying to be on the safe side. Thanks again!Comment
-
So hide your stupidity and delete the thread!Originally posted by PaintSkater00
Ok thanks alot kind of feel kind of stupid
Glad you got a helpful answer from someone.
Last edited by SlartyBartFast; 01-28-2004, 07:28 AM.Comment
-
There are no stupid questions. the guy was confused and that is all there was to that. I have asked some dingers myself. If I would not have asked them I would never have known the correct answer.
Hope you enjoy your warp! :)Comment
-
I was joking.Originally posted by lamby
There are no stupid questions. the guy was confused and that is all there was to that.
Note the use of smilies.
Comment
Comment