rear velocity

[Automager]

I have a problem with my rear velocity, when i put air on my mag it leaks out the back. There is a hole at the end that it comes out of, is there supposed to be a hole cover at the end? The valve that the rear velocity is on is a SmartMag valve with reactive trigger upgrade.

[PyRo]

I don't know much about the smart mag, but you may have your velocity to high? It is supposed to leak out the back after you turn the velocity up to high.

[bornl33t]

The valve will vent out the back if you're velocity is too high. Just a safty. try turning the screw out 1/2 -1 full turn. if it don't go away you may have a problem with the reg...

[BlackVCG]

Chrono in the gun at around 280-300fps. If the leak goes away then your gun is fine. If not, then you'll probably need a new piston.

[PyRo]

He He my gun was leaking at 150fps i was about to buy a new piston, then i noticed my reg seat was in backwards so make sure your reg seat is good and is in the right way.

[Automager]

Hey i was looking through my stuff and i ran across this post. I got the gun fixed it was one of the internal orings it was knicked??? But my mag works good and im sorry for not responding for so long huummm 11 months later mags are the best gun in the world

[PyRo]

Well, we all forgot about this post, and you had to go and bring it back. You big post bringer upper person.

[Automager]

im so sorry

[TheBigRaguPB4L]

Originally posted by PyRo
Well, we all forgot about this post, and you had to go and bring it back. You big post bringer upper person.

what the.......?