I have had this happen one other time, I did fix it but it was so long ago I cant remember what i did. I screw up my tank and if i only partially put it on the bolt Rhythmatically jumps a little, its like the trigger isnt catching, i have tried holding the trigger in, and i have tried reseating the bolt, but if i put it all the way on it wants to empty the whole tank out the barrel. Any Ideas? I figure its a seal problem, but we just got a foot and a half of snow so i really cant make it to the pro shop to get a new seal kit
-
-
Does it shoot right when u gas it up? Does it expell air out the back of the valve? -
Wait, I kinda skim read your post the first and then replied right away. I just noticed you said it will leak like crazy out the barrel. That, I do not know what to say to. Did the problem suddenly spring up or did your gun never work? Try taking your valve apart and checking o-rings and lubing your on/off. Is it a level 10?Comment
-
i had the same problem with mine about 2 weeks ago. i thought i needed some new o-rings but all I had to do was turn the velocity down and then crank it up afterwards.
hopefully that's all you need.Comment
-
Hey, thanks for the input, unfortunately I already tried that, I think my trigger needs to be re-calibrated, I just put in an intelliframe, and it started happening when that went in, I replaced the O-rings in the on-off valve, no good, I figured they were sticking, but nothing seems to be working, i dinked around with the velocity, but that did nothing also, I tried re-seating the bolt with my finger, and that did nothing. I cant even pull the trigger to reset the bolt, so i think its gotta be the intelliframeComment
Comment