how do you disassemble your rt pro?

[rtpro28]

i just want to disassemble my rt pro without messing anything up. when you take the field strip screw out does the valve body come off. what's an easy way to put the intelliframe on?

[Dayspring]

To remove the valve-

Turn the safety off and pull the trigger.
Take out the field strip screw out. Pull out valve.

To add intelliframe-
Take out front frame screw on current grip (small black screw).
Put Intelliframe on gun, and replace screw. (Make sure that the rail bushing stays with the rail & didn't come out with the old frame)

[GT]

check my sig for building and unbuilding (cute I know) a mag.

[rtpro28]

do you have to take the valve off, or does it just kinda sit there? and will the valve all stay in one piece?
Thanks alot for your info, i appreciate it.

[Dayspring]

Stays in one piece. (Although the bolt may or may not come with it, but that's no big.)

The valve is under some spring tension, so it may/may not slide right back. (Keep in mind you need to twist a bit b/c of the z-lock pin on the valve.)

It's really easy. Just make sure the gun is totally degassed, otherwise the on/off pin may shoot out.

[rtpro28]

thanks dayspring,
your i big help, if i have any questions i'll let you know, if that's cool.
thanks again..