Problems w/ the RT

[Aparo]

I've read that if you set your pressure higher your trigger will be more reactive, but I run my gun on almost 1000psi but not quite. The thing is that it still doesn't feel reactive enough. Is there anything I can do to help it?

I also read that you can't short stroke an Automag RT but mine short strokes all the time. Is there something wrong with it? Please Help!

[SGTKennedy]

1000 psi? and its not reactive enough? wow. well, i was having problems with mine. cleaned it and i put all new soft parts in it, and now i run about 625-650 or its way too reactive for my wallet. Try cleaning it real well, thats the first thing i would try. otherwise i would say buy a spare parts kit, if it doesnt work, well, your gun has new seals. if that still doesnt work i hope it doesnt cost much,
Kennedy

[a_malfunction]

Call AGD and see about getting a shorter on/off pin. That should do it.

[TheBigRaguPB4L]

you can short stroke an rt. it's just more difficult than a standard mag because of the kick back the reactive trigger gives it.

[Ityl]

make sure everything is aligned right, put the front screw in snug, then put in the valve and banjo. Snug that. Tighten the front screw with an allen key and then tighten the banjo.