emag firing problems

[blakdragon21]

my emag is only firing every other shot, it will fire then chuff then maybe fire again, and this is all with out paint. what do i do? I have tried the medium and short spring with out success.

[gibby]

How much air do you have in your tank? Is the trigger adjusted properly?

[blakdragon21]

i have about 2000 and yeah it should be adjusted properly, tunaman did it for me

[gibby]

Check to see if the oring in the Level 10 carrier isn't too tight. While you're at it, drop a few drops of oil in the ASA before you air up. Your valve could be running dry and causing the bolt to stick onto the orings.

[blakdragon21]

yeah i tried that, still nothing

[gibby]

Increase the velocity? What's the output pressure on your tank? Adjustable? Preset?

[blakdragon21]

i tried to increase the velocit but it would vent ou the back and it is a preset at 850

[Tunaman]

Are you telling me you are changing springs and carriers after I just tuned this marker?

[Wank107]

Same thing happened to me after i got it from the tunaman...i dono whats up but...this is what i tried...First off i had the lightest(shortest) spring in the gun. Then i tried putting new carriers in. I went larger in size(More lines = bigger....dots = half sizes bigger) After that, i played with the amount of shims that were in the valve. Try it out...it worked for me...and u cant over oil a mag...so oil that thing like no other

[blakdragon21]

yeah tuna, i don't know what happened, I got it back and fired it worked for like a hopper, then would have bolt stick, i know you had the one line carrier and one shim, but that was not working for me witht the small spring, should i go back to that set up and try again?

[Tunaman]

I fired it like 500 times...I dont understand. You could try one carrier smaller using the same oring. Let me know how it goes.

[blakdragon21]

will do, just got to get some air, thanks tuna

[blakdragon21]

I just tried a set-up with the medium sring cause I thought the small spring was not bringing enough force to the bolt back and added 3 shims like someone said above and it would shoot fine untill my tank drop ed below 100 then chuff chuff. ALso it still would only fire every other in elcetro and the pin would be hitting it too, like it was in hybrid or someting. plz help me someone, thanks

[Tunaman]

You dont add shims to stop bolt stick. Take all the shims out for now.