Hyperframe problem

[GhillieGuy]

Well first let me say that I am ashamed to say that i do have a hyperframe problem on my mag. Well for awhile now it would not work, when i would shoot it would only shoot about 5 times and then just click. I took the grip pannel off and noticed that when i pull the trigger the soleniod doesnt even click anymore. Iv'e tried turning up the settings and the power but nothing. Any ideas? I will try and call centerflag tomoro.

[Big'n slo]

What valve and on/off are you running it on?
Does it shoot when you push the sear up manually?

[tdogreb]

ghillieguy, i was having a similar problem with my boo-yaah frame. it would shoot fine for 30 shots or so then just click.the problem, after much pain and suffering, was the field strip screw was backing out. had to use lock tight keep it in. let us know what fix you come up with.

[tdogreb]

ghillieguy, i was having a similar problem with my boo-yaah frame. it would shoot fine for 30 shots or so then just click.the problem, after much pain and suffering, was the field strip screw was backing out. had to use lock tight keep it in. let us know what fix you come up with.

[GhillieGuy]

Well guys, i figured out that i need a longer on/off pin becouse the one I have isnt pushing the sear down all the way and re-setting the soleniod.:)

[Cryer]

If I were to use an Xvalve and a Hyperframe, would the ULE trigger's on-off work, or would I have to use the centerflag on/off?

Also, I'm assuming youve shot an Emag, Ghillie... How would you compare the triggers and overall performance of the emag vs hyper?

[GhillieGuy]

Originally posted by Cryer
If I were to use an Xvalve and a Hyperframe, would the ULE trigger's on-off work, or would I have to use the centerflag on/off?

Also, I'm assuming youve shot an Emag, Ghillie... How would you compare the triggers and overall performance of the emag vs hyper?

Well personally i think they are both about the same in perfomance, but the e-mag is more dependable. As far as the pull on a hyperframe, its very short, and hard(mouseclick) and the E-mags is a litlle bit of a longer pull but alot lighter. So it all depends on you.:)

[Cryer]

cool, thanks!

[shaunyoung000]

What kind of gun are you putting it on. Use the RT on/off assembly, it works better on mine. On classics,, use the centerflag one. Not sure about e-mags or x-mags, try using the original ones if you have one of those. Also, when you take the grip off (LCD side) you can see a round thing above the silicon chip. this thing should be going all the way back and forth when you fire, if it isn't, take the whole grip frame off and use an allen wrench to loosen up the round deal. Move it towards the rear of the trigger frame. Put it back on, gas up and try it out again, let me know what happens.

[GhillieGuy]

Originally posted by shaunyoung000
What kind of gun are you putting it on. Use the RT on/off assembly, it works better on mine. On classics,, use the centerflag one. Not sure about e-mags or x-mags, try using the original ones if you have one of those. Also, when you take the grip off (LCD side) you can see a round thing above the silicon chip. this thing should be going all the way back and forth when you fire, if it isn't, take the whole grip frame off and use an allen wrench to loosen up the round deal. Move it towards the rear of the trigger frame. Put it back on, gas up and try it out again, let me know what happens.

Well let me start off by saying nice pic (dont really know the purpose), and secondly i found out the problem. That round thing is called the soleniod.:)

[shaunyoung000]

yes, yes, I got that, just using some generalities to make sure anyone could understand. Regardless, glad you got it fixed.

[GA Devil]

In my experience i have found that xvalve and hyperframe combination you need the ule trigger kit to get it to operate correctly. The centerflag on/off does not allow it to work correctly....why? I am not completly sure. But I know that has been the case every time for me.

[hitech]

The ULE Trigger is the way to go for ALL valves.

[GhillieGuy]

Originally posted by hitech
The ULE Trigger is the way to go for ALL valves.

The problem is that I have the RT valve with only 1 o-ring.

[Cryer]

ShaunYoung-

d00d, I love your sig and everything, but its WAAAAAAY too big. Rules say 350x175 and less than 20k...