rt leaking

[lam2469]

hey guys i have a classic rt with level 10. The rt is leaking out the back by the velocity. the velocity isn't to high because i turn it down and it still leaks. Also it is not the carriers because i have to smallest one in. Idk could it be the reg piston o-ring or some other o-ring?

any ideas?

thanks

[lam2469]

anyone? Help?

[thecavemankevin]

try replacing your reg piston oring first (make sure your valve is oiled)

also, what spring are you using?

Do you know for sure your velocity isn't way too high (like 300+fps). it is easy for the velocity to be higher than you thought it was when you are using LX

Finally, if this all didn't work, then you likely need a new reg piston because it is leaking at to low of a vel.

i had to do that, and it worked after that although would occasionally leak just a little. Usually a little oil fixed that.

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=136&CATID=6