Level 10 Acting Up

[Wank107]

The LX wont work! One carrier sticks, the other leakes. If i oil it, it doesnt help. The gun KEEPS stopping on the ball detent...even if the damn ball detent is out. i am really fed up with my gun right now, i have gone through 3 tanks, and NOTHING works. HELP MEEEE

[i_baked_cookies]

i always say this: use the same oring when you testing carriers.

do you have ult?

[Wank107]

I do use the same oring!!!! no i dont have ult

[Branchvillian]

I also looked at his mag. He was getting bolt stick, so I went up one carrier ad it leaked. So i went back down and then it was topping on nothing. I used the same O-Ring. I turned up the reg, and it turns to where it leaks and still doesn't fully cycle. it does it with all bolts.

[deadeye9]

I was having bolt stick problems, too. Added one shim, haven't had a stick since.

[NeilS300]

Have you tried bigger springs? That might stop the bolt stick because theres more force pushing back on the bolt. I would try the middle and biggest spring and see what happens.

[Branchvillian]

I added shims, and also used all springs. I was pressed for time, seeing as how I was working...I may have overlooked something.

[Wank107]

i sent it off to another guy....its do or die...tourny is on sat

[danheneise]

what's your L10 setup?

Right now mine has Lightest Spring , #1 Carrier , 4 shims.
If i go one more down on the shims it gets pretty crazy bolt stick, just as much as one shims sets my system up perfectly, i've found the best quick setup is Medium Spring , #1/1.5 Carrier , 2 Shims. i just wanted better effiency so i went through the trouble of tuning more to get the smallest spring to work