Me again !!!! LVL 10!!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Toto
    Registered User
    • Nov 2003
    • 52

    #16
    I change the carrier and it seems that i solve the bolt sticking problem

    When i pull the trigger in slow motion the gun crono about 260 FPS, and when i pull it in a rapid way it cronos like 280, is this normal?

    wright now there are no shims and i put the carrier that has 3 grooves and 1 dot (ID 3.5) whith the medium Spring (the pink one).

    Do i hace to go to the bigger carrier or should i stay with the actual configuration???

    This MAG is a Classic 68 running on CO2
    Saludos
    Toto

    Comment

    • Joni
      Registered User
      • Nov 2003
      • 942

      #17
      That sounds more like you are getting liquid co2 into the marker. Do you have an expansion or antisiphon?


      ULE RT Custom

      Red ULE body
      ULT
      Electric Logic vert frame

      Comment

      • Toto
        Registered User
        • Nov 2003
        • 52

        #18
        i have an Aci SubZero 6 stage Xcahmber, gas thru t stock and a coiled hose remote

        i dont think that liquid is getting into the valve

        When i say that i pull the trigger in a rapid way i am not refering to shot 7 balls per second, i am refering in how i pull the trigger

        thanks for the help but i ran out of CO2 and i can not do more testing

        i think that during the weekend i will refill my tank and stat testing again

        Comment

        • Toto
          Registered User
          • Nov 2003
          • 52

          #19
          Ok as the subject of the tread says

          me again!!!!!!

          The last time i make the LVL10 work i used the one of the biggers carriers, to be exact the 3.5 carrier with no shims and the middle spring, in that time the gun workd well, no leaks, and shoot great, this test was runned with co2.

          Today a friend of mine bought his HPA tank, we put it to the mag and the gun start to leak from the barrel, i supose that its start to leak because of a lack of oil, so i oil the powertube and gas it up again, but the gus still leaks

          Could it be because the HPA tank of mi friend has am output preset that is lower than 750 psi???

          i am gojng to try to get some co2 to test the gun as it is

          Thanks to everybody for the help!!!!!

          Saludos
          Toto
          P.D.: I have a realy important War-game in a few weeks and i need the MAG!!! and i realy need the MAG!!!!

          Comment

          • athomas
            Of course it works-its AGD
            • Jan 2002
            • 8039

            #20
            750psi is low and could affect the recharge rate but shouldn't affect the level 10 causing laks down the barrel. You are using a very large carrier. Try going to a smaller carrier since you are gradually breaking the carrier 0-ring in.
            Except for the Automag in front, its usually the man behind the equipment that counts.

            Comment

            • Toto
              Registered User
              • Nov 2003
              • 52

              #21
              Last edited by Toto; 03-22-2004, 06:56 PM.

              Comment

              Working...