quirky hyperframe, need help

[robertjuric]

Ok I went to go play with my mag and the hyperframe today for the first time and it wasnt working. I have no clue what's wrong with it. Im not really even hearing the solenoid click when its on much more, it will, but not everytime. Also when I fire, the LCD just blinks, it wont say FIRE unless I hold it. I was playing around with it last night trying to figure out how to intellifeed it.

Also, the rear hole where the rail bushing normally goes is to small, everytime I tried to push it in, it would push the bushing up through the rail and prevent the valve from going on so Id have to bang it back down.

Also, I think the front bottomline hole is crossthreaded

Somebody please help, Im very tempted to just get rid of the damn thing and go back to my trusty mech ways.

[tonybhall]

pm hitech

Hitech is the AO resident expert on Hypers. I know you have a level 10 on yours and per your post you are trying to intellifeed it.

I never had a level 10 when I had mine and I never attempted to intellifeed it so I can't offer much advice on that. But if anyone knows, Hitech would. Also, I believe the manager of Centerflag's name is Samo. I had told you before that I could not remember it. He is great. Give him a call.

Bryan

[robertjuric]

Ok from what Ive read in the other posts, all I need to do is install this ULT. Well Im about to go to the post office to ship the valve out for the required milling by BradAGD. But can anyone confirm this?

[dyst0pia]

does the frame work when it is off the gun? Like, will the solenoid fire with every pull, and will the lcd work?

have you tried new batteries/resetting the board?

[robertjuric]

When the frame is removed the solenoid clicks everytime. The LCD works, but it acts kind of funny. Instead of saying FIRE every trigger pull, it just blinks, it will only say FIRE if I hold it down. Example: if Im walking the trigger really fast it will just be blank, but when I stop it goes back, I hold the trigger for jus a sec, and it will say FIRE.

I noticed though, on the gun, the solenoid wouldnt make that louder clicking noise with the sear though.

My valve is on its way to get milled for ULT.

[hitech]

The ULT is the best upgrade when using a hyperframe. If you do do not have the marker aired uo and you want the solenoid to click each time you have to manually "reset" it. With the grip off pull on the disk on the "back" of the solenoid.

Also, the LCD will only diaplay fire while you have the trigger held. If you are fast enough you won't be able to see it.

Some lite reading while you wait for your valve.

[robertjuric]

Ahh Ive that many times over. If I decide to get the new 20bps board, they say you can trade the old board in for a nice discount, but I read about someone's original board being harmed in shipping. Hows the safest way to go about doing this?

[hitech]

Originally posted by robertjuric
If I decide to get the new 20bps board, they say you can trade the old board in for a nice discount, but I read about someone's original board being harmed in shipping. Hows the safest way to go about doing this?

That was probably my board. I would suggest shipping the entire frame. Complete with battery.

[robertjuric]

I just put in the ULT and it works!!! It was really slow b/c my tank was low, but Ill get a fill and post again tomorrow with better results!!

[tonybhall]

That's great

That's great to hear. I was going to feel really bad if you could not make it work. I am excited to hear how it does when you have your tank gassed up. I am sure you will love it. Maybe it is a good thing you can't make it to the March and April ACES. Good for us that is. B-)

I will e-mail you and tell you about a cool trigger mod that I came up with for my RT Pro.

Bryan

[tjmpaintball06]

I was having the same problem with my RT so i sold it and bought an emag. Centerflag had great customer service but i figured i should just stick with AGD.

[robertjuric]

Was the hyperframe shooting slow??

Well I got mine all fixed, and omfg its fast.

Tip to all Hyperframe owners: Buy Nerobro's IS switch, its soooo much lighter.

[tjmpaintball06]

mine wasnt slow it just kept giving me trouble. It wouldnt fire, low fps, just bunches of problems. It was semi fast but you couldnt walk the trigger because it was too stiff. It was short but very heavy. I tried out this guys emag and fell in love. I guess if u have a ULT and a new switch on the hyperframe it would be faster.

[the_fbi]

My Problem

My Marker isn't firing :'( my set up:
Lvl 10
Hyperframe
new on/off assembly <-- my problem

I can't shoot my marker... I pull the trigger, it clicks, but not as loud as it does when the sear is touching it. But yes it should be touching it... cuz the gun is together...

I think the pin in the On/Off isn't doing it's job. the bolt isn't being released.
I used the AGD diagram to put'er all together, I'm now going to put the pin in 'backwards' to see if the diagram is wrong, I'll reply if that fixs, but if not, I need help! Plus I'm going to replace the battery. I'll only reply if I find a fix, if not, then I won't waste forum space :P
I need help!
Plus anymore new boards out there I can't find any 4 sale