warp feed...couple quetions

[KAPP667]

Ok i have a minimag with a bunch of stuff on it. I play tourneys and run into te problem of the giant hopper sittng on top=big target, and i can't sight down the gun.

So i figured i would look into a warpfeed, to get rid of he huge profile and let me actually seewhat i'm shooting at, however at the places i play ati've heard mixed results.

1.I will be putting it on a minimag with DYE double trgger frame, is it reliable in activating without th intelifeed ?
ike does the vibraton sensor actualy work well ?

2.Has it ever refused to activate on anyone ? Like not sensing the gun being fired ?

3. does it keep up with fast firing (6-8bps) well, lik no gaps?

Just looking to see if anyone has had any big problems, my mai concern is the reliability of the vibratio sensor ging off with each shot and not activating from being bumped or something.

[PyRo]

The vibration sensor works fine. Probably 80+% of warp feeds don't use an intellifeed.
The sensitivity is ajustable, if it isn't sensing the gun being fired then there is either something wrong with it, or the sensitivity needs to be turned up. You can do this yourself, its just a small knob.
When you are fireing rapidly it stays on untill you stop shooting. The warp should have no problem whatsoever with keeping up with your fireing rate. It is still limited to the speed of the rev during longer bursts though.

[headcase]

Well as far as rate of fire goes, on my old Timmy(with the eye disabled) rate of fire set to 14, warp feed, 12v w/turbo rev. I could fire the 30rd full auto bursts without missing a beat, with no chops....I'm pretty sure it will feed your 6-8 bps with no problems


later
ssdd