Direct Intellifeed from E-Mag to Revvy

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ZeroXtreme
    From ZERO to Extreme...
    • Jul 2001
    • 142
    #1

    Direct Intellifeed from E-Mag to Revvy

    I've been searching through the forum, and I can't find any instructions on how to do the intellifeed link from the E-Mag's Warp-out terminals directly to the X-board of the Revvy, or maybe to the Revvy's sensor PCB. There must be some way to do this without having to buy a Warpfeed's PCB like Rob documents on his site (http://www.robagd.com).

    Help, anyone?
    Black Teflon E-Mag
    v1.37 (EM01478)
    __________________

    - 10" Armson Stealth / 10" Custom Products Barrel
    - AGD Flatline 3000psi/68ci Nitro Tank
    - Dye Tank Cover [Black]
    - Shocktech Drop Forward [Black]
    - NW Quick Diconnect Block [Black]
    - ViewLoader 12 V Revolution w/ X-Board [Black]
    - 32Degrees Macroline [Black]
    - VL-Bow [Clear]
    __________________
    Tags: None
    • headcase
      Gotta Love Toys
      • Nov 2001
      • 1141
      #2
      Just an idea, but if you splice the two wires in the emag to warp harness into the two wires going to the board from the eye it might work. I haven't tried it out yet, and please don't take my word for it.

      Anyone else have an idea.

      I have a spare Revy harness, so when I get my warp I'll try it.

      Later
      SSDD
      2003 SuperBowl Champions!, THE New England Patriots!

      He was constantly reminded of how startlingly different a place the world was when viewed from a point only three feet to the left.
      My Feedback

        Comment

        • ZeroXtreme
          From ZERO to Extreme...
          • Jul 2001
          • 142
          #3
          headcase...

          Thanks for the tip, I was thinking the same thing, although I don't want to experiment since I might fry something.
          I'm more or less looking for step-by-step instructions and diagrams from someone who already did it.
          I'm not too scared of frying my Revvy's board, I'm actually teriffied of frying my E-Mag's PCB!
          Black Teflon E-Mag
          v1.37 (EM01478)
          __________________

          - 10" Armson Stealth / 10" Custom Products Barrel
          - AGD Flatline 3000psi/68ci Nitro Tank
          - Dye Tank Cover [Black]
          - Shocktech Drop Forward [Black]
          - NW Quick Diconnect Block [Black]
          - ViewLoader 12 V Revolution w/ X-Board [Black]
          - 32Degrees Macroline [Black]
          - VL-Bow [Clear]
          __________________

            Comment

            Previous template Next
            Working...