Plenty of Mag parts to play with, but which to use?

[Tepes]

Well I have a lot of parts and want to know the best way to mix and match.

All 68 Classic parts x2 (complete guns)
Shock Tech Charger
ANS Phase II Charger
ANS Xtreme Flow Valve
ANS Venturi Bolt
Boo Yaah ELCD frame W/ on/off
Center flag HyperFrame (13 bps) W/ on/off
Original HyperFrame internals (13bps no tournament lock)
ULE Body Red
X-Valve W/ lvX

I do not yet have the X-Valve or the Boo Yaah, but they are currently being shipped to me.

So what do you guys think I should do to put together to build two pretty good mags?

[personman]

Shock Tech Charger
ANS Phase II Charger
ANS Xtreme Flow Valve
ANS Venturi Bolt

Those are all worthless. They do absolutly nothing. I suggest trying to sell them or just put them away. The stock parts are MUCH better than these.

Put the hyperframe, ULE body, and X valve on one gun, and maybe get the 20 bps semi board ($70) and then put the boo yah on the other. Thats how I would do it.

[robertjuric]

Id do what he said, except the new hyperframe board is only like $45 when you trade your old board in.

And Id just sell the booyah and get an intelli.

[Tepes]

Well that is close to the lines that I was thinking. When paring a HyperFrame with an X Valve do I use the X valve on/off or the CenterFlag on/off? Also Would I be better off using the X Valve with a Y Grip (if I get one) and using the Hyper Frame on the AIR Valve and just get a lvX bolt? Well I guess the latter questions are just preference. When I get all things sorted out I'll give, trade and some of the parts.

[Joni]

I would use the hyperframe on the X-valve, just to be sure that you will get no shootdown when putting down those strings on the break

[robertjuric]

Originally posted by Tepes
Well that is close to the lines that I was thinking. When paring a HyperFrame with an X Valve do I use the X valve on/off or the CenterFlag on/off? Also Would I be better off using the X Valve with a Y Grip (if I get one) and using the Hyper Frame on the AIR Valve and just get a lvX bolt? Well I guess the latter questions are just preference. When I get all things sorted out I'll give, trade and some of the parts.

I would definetly get the ULT for use with the hyperframe, they seem to have issues with most other on/offs. With that said, you would need the Xvalve for the ULT, so I guess you'd have to use the Xvalve for the hyper.

[personman]

You dont NEED the xvalve for the ULT.. it just lessens the chance for shortstroking. If you put the ULT in a classic valve and put a hyperframe on it, It would work, and you would have a LOOONG battery life . The only drawback is the classic valve is limited to 14 or so BPS without shootdown. That really isnt a problem with the stock hyperframe board and all, but honestly, you could put the ULT in the xvalve and get a new board and really rip it up.

Boo Yahs can be nice when you fix them up good. If yours is in good working condition, then I would say go for using it on your other mag. If I'm not mistaken, hostage is like the ultimate Boo Yah dude, so if you have any problems with it, I would contact him or read his FAQs page.