Leaky Mag

[eat my paint]

alright, well i have a classic valve w/ level 7, and yesterday, my on/off fell apart. i put the on/ff back in, im 99% its in right, and then when i got it all back together and gassed it up, it leaked out the end of barrel. can someone help me before i through it into the lake? Thanks

[Joni]

Does it leak when you hold the trigger?

[eat my paint]

nope, leak stops when the trigger is held
but it still leaks as soon as trigger is let go

[Joni]

Try changing the powertube oring

[eat my paint]

umm, i took off the powertube tip, and inside there was an oring on the tip, the powertube spacer, but not another oring. since this is the first time i took apart the powertube, and it has worked before, where could the oring have gone?

[Joni]

No rubber oring when you look down the powertube? No wonder it's leaking, but where has it gone? Only place it could have gone is into the chamber, but that chouldnt happen. Are you using CO2? Maybe it frose, and the bolt piston shattered it, so it could fall into the chamber. Just speculating here, I have never heard of anything like this.

[eat my paint]

ive always used hpa. im so mad at my gun right now.

[dj_pizzim]

not to jump on your thread wiht my problem but im having kinda teh same issues my was leaking just a little i bought a rebuild kit and started replacing teh orings i put it back together and its leaking in teh same fashon i have an o ring in teh power tube but it still leaks any ideas?