Do you think this is too restrictive?

[trains are bad]

Do you think 3/16 brake line is big enough? I don't want to cause any starvation. But Keep in mind I only shoot 6bps or so.

[RRfireblade]

3/16 I.D. ?

That's plenty but why not use a more typical PBall air line?

Any idea what pressure that line and fittings are rated for?

Should be at least 800psi or better.

[Morfesto]

Most brake lines have a burst pressure well above what the HPA tank can hold.

[trains are bad]

3/16 I.D. ?

Nope. O.D.

That's plenty but why not use a more typical PBall air line?

no stores-cheaper-better kind of

I'm not happy with macroline and I'm out of it anyway. I'm changing my setup a lot now till I get everything situated. 4 feet of brake line is $3 and can be custom fitted. Maybe when i get everything down I'll go steel braided.

[DeerChaser]

Check the working PSI on those fittings most likely it's 300psi!!

[RRfireblade]

They're just fairly un-attractive is all.

SS line is at or under $10.

[trains are bad]

Check the working PSI on those fittings most likely it's 300psi!!

Brake line? I'd think it'd be rated for thousands.

They're just fairly un-attractive is all.

True, but I don't care

SS line is at or under $10

For 2 pieces that's $25 at least with shipping, and it will likely be 'obsolete' for me soon anyway.

Apparently nobody thinks it's too restrictive at least.

[RRfireblade]

Originally posted by trains are bad




Apparently nobody thinks it's too restrictive at least.

Nah,it'll flow plenty.

Might want to check Ebay though,I've gotten SS on there from time to time for a few bucks.

Are you running through a gas through or something?

Why 'obosolete'?

Just curious.

[trains are bad]

I'm running a cheap expansion 32* expansion chamber right now.

I meant "obsolete" because I'm going to be changing my setup a bit-I just bought a y-grip. I'm also going to try running a inline stabilizer after the expansion chamber. Stainless steel hoses are not adjustable.

[DeerChaser]

I didnt say the tubing, I said the fittings. I would check into it. I have tons of 1/4 SS tubing, working PSI 10,300.

[trains are bad]

Yeah but I think brake fittings would be rated high too. At any rate they look beefy enough and didn't blow out overnight.

[trains are bad]

Im out, and don't feel like spending more for shipping than the line.

[trains are bad]

About an hour one way.