ULT problem

[viper_ssc]

I just got my ULT today. I installed it and it started leaking down the barrel. I tryed adding more shims and taking shims out but it wont help. How can I stop the leaking?

[DeerChaser]

Drop down a carrier size, use the same o ring.

I quess I should ask if you have level 10 first. Oil that ULT also, oil it good...

[viper_ssc]

its at the smallest carrier already

[DeerChaser]

then I would try a new oring

[viper_ssc]

Its not the lvl 10, I took out the ULT and replaced it with the stock on/off and it worked fine.

[Joni]

Check this out

http://www.automags.org/forums/showthread.php?s=&threadid=96538

I think I remember someone having a similar problem there. Sorry, I know it's a long thread, but that's all I can come up with.

[viper_ssc]

I stopped the leaking but when I gas it up it fires and when I pull the trigger it does nothing. I have about 3000psi in my tank so I know thats not it.

[DeerChaser]

Tighten your field strip screw with an allen, snug it down.

[Joni]

Maybe adding shims to the ULT will help?

[viper_ssc]

I tried switching to a larger carrier and it let me shoot more than one shot but I get horrible shoot down with both on/off assemblies. Im gonna hire a tech to live in my house and fix my guns when they go bad.

[tonybhall]

dead trigger

I get the same problem with the trigger going dead. I can usually fix it by playing around with the rear frame screw. Deer chaser said tighten it, but usually loosening mine fixes it.

Bryan

[viper_ssc]

the problem is in the lvl 10 I think because I put in the stock on/off and it still doesnt work. I might end up sending it in to AGD to see if they can fix it because there are no mag techs near me.

[viper_ssc]

problem fixed I think that the oiling the on/off did a lot to fix it. The last couple of days I've been trying to fix it but all I was doing is short-stroking it. Ok, as soon as I gas it up it fires anyone know how to prevent this?

[Joni]

Hold the trigger while gassing up. That should stop it from shooting.