trigger bounce

[Psychedelic]

ok, I've owned a classic before, and currently own a timmy. But I was looking to go back to a mag. I was thinking about getting a tricked out mechanical mag with an X-valve / ULE Trigger kit. I play a lot of tourny ball where a bouncy trigger would obviously get you pulled from the game so I was wondering if it is possible to set it so that the trigger doesn't bounce.

[CaliMagFan]

ult kit is the key

with the ult kit you wont be able to bounce or rapid fire like you can with the stock rt on/off... i know i could when i first got my rtpro cause i used a lot of shims in the ULT.. but now the valve/ult has broken in a bit and the maker cannot go reactive like that now.... it still has enough reactivity to where i can walk it tho.. which is good... so, with the ult kit, your mag should be really tourny legal... its just like turning the input pressure down, without the penalty of possible slower cycle rates without shootdown...

-hope that helped
-kyro

[tonybhall]

check out the Custom ULE RTP package

Hey,

Check out the Custom ULE RT Pro package. My team uses and loves them. When we first got ours (with ULT) they bounced like crazy. But now that mine is broken in, if will not bounce but is walkable. The trigger pull is insane light for a mech trigger. It's not as light as an electro, but really close and no batteries.

Bryan

[Psychedelic]

awesome. Just didn't wanna show up at a tourny and get called out. Thanks guys.

[Dayspring]

An RT equipped mag will not bounce unless set up to do so or something is really out of spec. So going out there without the ULT will be just fine.

[shutter13]

unless you got some extra ULT shims you wont be bouncing alot

[Z-man]

Exactly. With or without the ULE Trigger mod, you can legally play with an Automag RT. Just don't set it up where you (or a ref) can make it fire 2+ shots off a pull and you will be ok.

[BOB THE ALMIGHTY]

trigger bounce problems

hi every one this is officialy my first post ever. I have an automag with and x valve and intelifeed trigger(hooked up to my revi). Every thing works fine but it goes reactive. I dont know how to get it to go back to turni leagal semi. When i got the gun it came that way. Just wondering what i can do so me and my team can go back to playing.
P.S. if any one is willing to sposor a team in conneticut please let me know

[Dayspring]

What's the input pressure from your tank?

What gun is the Xvalve in? RT Pro? Classic body?

You need to give us a little more information before we can help.

[Z-man]

Welcome to AO.

Like Dayspring said we do need a bit more info to help you out. It may also be that some of your parts are worn out and need to be replaced. Though you would benefit from the help here, be aware that every Automag can be sent back to AGD for the first time and rebuilt for free. They will replace anything that is worn out and tune the marker for you.

[BOB THE ALMIGHTY]

bouncy trigger

well i have an airgun designs 3000 psi tank i think the output it about 850 right now im out of air so im just guessin. The body is a slugmag body thats custom built. Im not sure if that helps with info. i dont know much bout this gun i got it last week

[Z-man]

Do you know what kind of valve you have? what does it say on the side of it?

[BOB THE ALMIGHTY]

sorry i thought i posted that on my original post but i have an x valve with the level ten

[Dayspring]

What rail are you using it on? Cuz that'll affect the pin length requirement.

[BOB THE ALMIGHTY]

what do u mean by rail?