All pressure regulators, by the nature of their design, cannot fill a chamber instantly. Regulators must fill most of the chamber quickly then taper off to reach the desired pressure. Chamber Fill on the 68AUTOMAG takes roughly 1/3 of a second. Because of the Regulator tapering off, when firing the paintball gun faster than three shots per second, the Air Chamber will not fill fully and the average velocity will drop by 10 to 20 fps.
-
I got that from warpig. -
ive shot 7-8 bps over a crono on my old classic- no inline reg- just the gun reg and the tank reg- and i shot something like
295
292
295
296
297
294
it just kept randomly jumping around between 292 and 297Yummy yummy yummy, I've got fun in my tummy.
-
I, too have a classic. I have never noticed any shootdown. I have light chrono so I have never really tested.Comment
-
According to
the RT valve recharges at a rate of 9 bps.Comment
-
...@ 600psiOriginally posted by deadeye9
According to
the RT valve recharges at a rate of 9 bps.
Its been recommended that you run at least 800 psi into your valve (whether classic or Retro/X) to take full advandtage of it. The higher the input pressure, the faster the air chamber is refilled.
Team Sandbaggers.
-We own j00 all.-Comment
-
wait a second....u guys arent running like 1200 psi into the reg? huh wel i get no shootdown
Comment
Comment