xvalve/lvl 10 prob

[brijohnx]

so, just opened up my x
and the back carrier, etc will not come out

after getting off the front piece, all that came out is the shim, i've tried banging, it just seems stuck....

[spyder_strypes]

Take your field strip screw.

Screw it down into the power feed tube, into the carrier.

Pull.

It'll come out, just be careful not to tear an oring.

[brijohnx]

thanks, okay, so i got it out, and now i've got the first steps of the lvl 10 setup going..

i gas up the marker, and i can't fire
the velocity turned up all the way, but it seems like the sear isn't tripping the on'off

everytime i've taken it apart after this the valve wouldn't come off because the on/off pin is still sticking out....

any ideas?

[spyder_strypes]

Turn the velocity up a lot more...when I installed mine, it took a couple of turns to get the velocity back up.

[Dayspring]

Pull the trigger before pulling the valve out.

Originally posted by brijohnx

everytime i've taken it apart after this the valve wouldn't come off because the on/off pin is still sticking out....

any ideas?