Flatline Gauges

[mike82]

What kind of gauges should i get for my flatline i need some new ones...

[Dayspring]

One HP one and one LP one.

The HP one should read to over your tank's max pressure. (4000psi on a 3k system, 5000-6000psi on a 4500 system)

The LP one should go to around 1200psi.

The actual type you get is up to you, but you want the mini gauge. The big ones won't fit.

[lamby]

just dont get replacements from AGD!!!

the gauges that agd use SUCK! I bought 32 deg gauges from a local guy to replace mine that broke the first day out with the new tank, and have not had a problem with them. The dye ones are ok too, but twice as much.

The 32 deg ones cost me $8 each

[mike82]

where did you get them for 8 bucks
im looking into getting Air America ones..

[BlackVCG]

The Ashcroft gauges that AA uses are the only REAL gauges, however they are bigger than mini-gauges and won't fit on the same side on a Flatline and don't exactly look as good.

Most all of the mini-gauges out there are a junk and the AGD ones are at the top of the list. The faces will crack on them in a matter of a few uses.

[Kevn 419]

where is a good place to buy guages online?

[lamby]

anywhere you can buy 32 deg or dye mini gauges.. I bought mine from a local "store" aerostar

[oldsoldier]

888 paintball has them. The 32* ones are the ones I have...they work fine.

[mike82]

Black, so can i put those 2 AA gauges on opposite sides? Im game for great working products not ones that just look good.
thanks for the help
mike

[Gadget]

I'm using Macdev micro gauges on my Flatline, seem to be good quality and work well.

http://www.macdev.net/us/misc.htm

[Hellaspaint]

In Dye gauge the indicator plate loose the right position and it is moving around.
Phat gauges from ACI are good but some times after several fills a leak start from the small safety hole on gauge body.
The same happen in 3A's 4.5k regulators, leak from that small hole!!