Cali's ULE Custom Q&A/Tech help

[Duck Hunt]

Well I posted about my problems in my own thread and Cali directed me to this one and I decided I'd post my progress.

I started out having the bolt stick problems right outa the box, fixed that after reading this thread =) I did the squeege test and adding another shim (3 shims) and it works pretty good now. I went to the field today and played for most of the day, the reactivity is almost gone which makes it more controlable. My only problem today was I chopped acouple of balls using the smallest spring, I've switched to the red spring and raised my velocity up till it fired and it looks like it'll be alot lighter on the paint. I need to go pack to the field and re chrono and I'll post more updates when I get them. Thanks for the great thread!

Sean

[CaliMagFan]

Thanks for the reply and the update duck hunt..... I'm glad the info here counts. when you turn up the velocity for the red spring you'll notice yourself turning the knob quite a bit (maybe more than your gut tells you is right). But it's right, there is less a step in required velocity for the jump to the longest spring.... take into account your local field limits---zooom zoom--- and use that you guide what spring you use.... i can just barely get away with the longest, but i'm chop proof and flatline on velocity with the middle (RED) spring at like 278-283...

thanks again

-kyro

[TACO-MAH]

used x-valve

I wasn't sure if this was the right place for this question, but the information you provided will be a great help to tune the valve to my liking so i hope you or someone else might be able to answer my questions.

I just bought a used x-vavle with ult. i'm installing it on a "formerly" automag classic, ule body, stock rail, blade trigger intelli, preset 45/3000 hpa.
my question is should i change the AM/MM sear assembly to a RT assembly. will this give me a shorter trigger pull? or is it needed at all?

my next question, the valve only came with one shim left un-used, not sure if it's a lx shim or ult shim yet, how can you tell. i'll take the valve apart soon and find out the set up in the valve, but if i need more shims, can you purchase just ult shims on the agd online shop or only the lx shims? i wasn't able to find it.

sorry about the long post, but im itching to test out the x-valve after using the classic for such a long time. by the way i wish i was able to make the socal vs nocal game. i'm in la as well

[CaliMagFan]

hi there... this is as good a place as any to ask....

you need to use the sear assembly that goes with your rail..... the AM/MM sear only fits that classic style of rail, likewise the RTP sear only works in the rtp rail.... both sears look about the same... the difference is in the pivot point.... the pivot pin on the am/mm is inserted into the sear assem. before snapping it into the rail from above.... the rtp pin is pushed into the rtp sear assemb from the side in the case of the rtp...

ULT shims are .005" to my knowledge, LvlX are .010".. so the ult are half the thickness.... hard to tell if not upon side by side compairison..... but you can deffinately tell once you have them next to eachother.... you can order more from the agd store i believe.... http://store.airgun.com

i dont mind a long post.... thats what learning is about...
thanks for the post...

-kyro

[misenhei]

whoa

thanks for that little heads-up! never looked close enough to realize they were different sizes.....guess i need to re-separate my extras (not to mention the ones being used!!)

[CaliMagFan]

testing pic posting....

[slade]

you know, you can just click the "preview post" button...

[B.A.M.]

hey thats exactly what my mag looks like all black

[B.A.M.]

CaliMagFan you are my hero once i get my nitro filled im going to try the torque thing.
http://img95.exs.cx/img95/2139/IMG_0033.jpg
MY Mag

[CaliMagFan]

i just changed the config on my rig.... check it now

[B.A.M.]

if im not mistaken isnt that a chimera trigger frame
pretty sick

[CaliMagFan]

It's a logic frame... twice as pimp as the rogue one IMO... i prefer the fireblade trigger over the AGD blade trigger that rogue uses.... www.logicpaintball.com

awesome product and ryan is a cool guy to deal with... the trigger stops give the trigger a great feel and in combination with the ULT its probably the shortest/lightest pull on any mech gun with the exception of the hAIR trigger and the P-frame.... neither of which are out now...

-kyro

[B.A.M.]

i love that trigger and now thats another thing i need to buy need to resist but so sexy ahhhhhhhhhh

[Hornet2099]

Nice gun

Nice gun man, Are setup's are somewhat similar, I have a warpfeed on mine though, and because of that i didn't really want to mount my VA to the rail. I'll get a pic up soon

[CaliMagFan]

shamelessly gunna bump my own thread because i'm seeing a lot of RT issues in teh tech forum at the moment... trying to save the hassle of many threads per topic