Here is my setup:
ULE Body
Logic Rail
Stock Trigger Frame
Lvl 10 (long Spring)
Adjustable Nito tank
Emag valve w/ RT on/off pin
Here is my problem
I gassed up my gun after disassembly and cleaning and there is a leak out of the back of the valve. I fired the gun and held in the trigger and the leak stopped so the on/off is not the problem. I then back off the velocity and the leak slows but will not stop. I then back down the input pressure to around 650 and the leak stops but the bolt will not cycle. I then switch to a short spring and the leak stops completly. Also either the field chrono was way off or I was shooting up to +/- 20-30 fps. what could be the problem?
I just ordered an Emag/RT parts kit and plan on replacing everything. Will this solve my leak out the back of the valve and allow me to use my long spring on the lvl 10? That was really frustrating. Any help will be appreciated. Thanks.
ULE Body
Logic Rail
Stock Trigger Frame
Lvl 10 (long Spring)
Adjustable Nito tank
Emag valve w/ RT on/off pin
Here is my problem
I gassed up my gun after disassembly and cleaning and there is a leak out of the back of the valve. I fired the gun and held in the trigger and the leak stopped so the on/off is not the problem. I then back off the velocity and the leak slows but will not stop. I then back down the input pressure to around 650 and the leak stops but the bolt will not cycle. I then switch to a short spring and the leak stops completly. Also either the field chrono was way off or I was shooting up to +/- 20-30 fps. what could be the problem?
I just ordered an Emag/RT parts kit and plan on replacing everything. Will this solve my leak out the back of the valve and allow me to use my long spring on the lvl 10? That was really frustrating. Any help will be appreciated. Thanks.
Comment