is this a problem? (with Warp Feed)

[CapoMinimag]

i have my Warp Feed attached to the mounting plate by only one screw. I can't use both screws because it doesn't allow enough clearance between the Warp and my 68/3000 tank. I had to swing the Warp out a little wider than normal to get it to fit. I think it is a bad thing to be holding all that weight by one screw, but does anyone know if I'll be ok? I need maybe an extension to the plate, so it will clear the tank? I don't have a digital camera right now to show you with.

Setup:
Clare Edition Minimag
Y-Grip
WGP Torpedo Drop
Warp Feed
*New Ricochet Apache Loader
68/3000 PMI Pure Energy

[Evil1]

It should be alright temporarily, but if you take a hard dive or if you drop your gun or something it might shear that bolt right off or something worse.I would get the extension plate if I were you.

[mcveighr]

Sounds like your warps on backwards.

Switch the plate the other way.

[SpchMag]

He says the plate has to be facing the back so that way he can hold the forgrip. If the plate is forward it blocks it.