I need recommendations on upgrades for my micromag 68

[Dralpo68]

My bro just bought me a micromag 68. Everything on it is stock. I want this marker to rip. Oh and any good ideas on self painting projects.....

Hey please put any suggestions ideas...
I would be delighted

[Shadow33]

Upgrades

I would recommend an X-valve as you will get a faster recharging valve plus you get the Level 10 upgrade as well.Those are two of the best upgrades you can do imo

[BagelBoy2004]

a y-grip and adjustable air system so you can get trigger bounce.

[RRfireblade]

X Valve/L10 combo.

Go-X program,trade in the classic valve and $225 and you get the X Valve w/ L10 factory installed in the valve.

[BagelBoy2004]

Originally posted by RRfireblade
X Valve/L10 combo.

Go-X program,trade in the classic valve and $225 and you get the X Valve w/ L10 factory installed in the valve.

You still have to tune the X-Valve a little.

[RRfireblade]

Of Course,but it'll shoot and work fine right off the bat with the factory set up.It's only if you want to really fine tune it that you may want to play with it beyond that.

[Dralpo68]

Would it be worth it to drop all that bank or just to get a new marker like a orracle or a imp?

[RRfireblade]

That's for you decide.

How much do you like the Mag?

It's perfectly fine just as it is,you don't NEED to upgrade it.

If it doesn't have it already,you can just put the level 10 bolt in the classic valve for ~$70.That's will eliminate any chopping of paint and then leave the rest as it is.If your not chopping any paint in it now,you don't really even need that.