IntelliFeed help with Warp and Hoppers - Rob?

[Chaos]

I've been searching around for the last 2 hours, i need some help. First off, I need the names of the parts I need to do many things, I'm going on a shopping spree to Radioshack. I also need the information on how to do these. I wanna set up my gun to the max for a local touriment coming up in a month or so.

I want to run my Warp at 12v or 9v parralell, I have pictures but could use an explination.

I want to intellifeed my hopper with my warp feed, mainly need explination on how if possible

I want to intellifeed my warp with my trigger frame based on the new sear movement (mainly I need to know the parts an an explination with the phone jack for when I get my new AGD Intelliframe).

I also want to run an on/off switch in my warp, a link to that post (I couldn't find one with pics and/or a detailed explination on how to set it up).

Any help would be greatly appreciated, thats my current project for my gun, PLEASE HELP. Thanks guys, oh and links are good enough for me, but i've been searching for the last 2hours on a hasty 56k and havent found much of anything... =o(

------------------
~ChAoScLoWnZ
[email protected]
MAG CENTRAL

Ever felt like picking up a knife and stabbing yourself, just to see what it'd feel like? Welcome to my world.

[Chaos]

up up up and away

------------------
~ChAoScLoWnZ
[email protected]
MAG CENTRAL

Ever felt like picking up a knife and stabbing yourself, just to see what it'd feel like? Welcome to my world.

[rifleman]

Lets not forget about those kits too!

[slayer]

I would also like to know how to do this with an emag. I know that there is connector cable to go fromthe board to the warp. Is that free? Next I would like plans for the intelli wiring to make my revvy spin when my warp does. thanks.

[Army]

Sorry Chaos, you of all people know this belongs in Tech Forum!

[donggie]

Slayer,

call AGD and they'll hook you up. A Tech by the name of Jon was very helpful to me. Give it a shot.

Don

[Chaos]

UP! (sorry about the multiple threads, when Army locked it I checked and didn't see it here so i thought he forgot to move it, I dunno why he didn't delete the one in the main forum, but thats why I posted it again)

------------------
~ChAoScLoWnZ
[email protected]
MAG CENTRAL

Ever felt like picking up a knife and stabbing yourself, just to see what it'd feel like? Welcome to my world.

[RobAGD]

Ok first off get a pack of 9v snaps ( not the HD version as they are too thick )

Get some 60/40 solder

Get some Fluxing Resin

Get a switch ( I dont recal teh one I used but its a stock RS one )

get some 24 or 28 gauge wire

get a good temp controled soldring iron and the book Soldering for the Idiot

Get a good set of wire cutters / strippers

Get some Heat Shrink tubing


Cut up some wire strip a bit off the end and pratice making joins.

Ok I threw this together tonight. Sorry for the crappy html but y web del box is ill.

Revy Emag Hack

Wapred Revy

Try that out sorry it's so *** ugly :/ My web content box is dead atm.

-Robert

[Chaos]

Thanks Rob! So let me get this right, from your setup you're running the warp internals inside the Rev and that controls the warp and the rev. Then your battery power is from the Emag power.

So I think I have what I want in mind:

2 9v's inside the warp running parrallel with an on/off switch, with intellifeed to the rev from the warp, all connected to the rollerswitch thingy inside my intelliframe. Is this possible and will it be efficient?

------------------
~ChAoScLoWnZ
[email protected]
MAG CENTRAL

Ever felt like picking up a knife and stabbing yourself, just to see what it'd feel like? Welcome to my world.

[RobAGD]

No idea on the inteliframe if that will work. Since I havent had to mess with one yet havent played with the grounding or - leg of the Warp.

Do some test for your self I think it work out that you will need to run one ( the Warp ) in the - then the revys warp @ + like if it has an external power source switch like a noid or something.

Try it out with a multi meter first and test dude...

-Robert

[donggie]

After hooking it up and trying to run the warp on 12v, has anyone had a problem with the warp just spinning and spinning. I've just finished it and can't seem to figure out what's wrong. I've played around with the jumpers and sensitivity but no dice. Could someone who has done this give me some help?

Don

[Chef123161]

Just finished the mod to have the revvy use the E-Mag battery and it works great! Thanks Rob!

[Cha0tic]

rob- that poor revvy.... you really chopped that thing up

[Fritzy]

I did it too, works like a charm. Pretty simple to do. Has anyone heard of this mod frying either the Rev or Emag board? It doesn't seem like it should as long as it is grounded well.

[AGD]

this thread is going historic in a couple weeks.

AGD