My classic mag is leaking out of the hole in the back of the gun really badly. If you shoot it the leak stops but builds up over the course of 3-4 seconds. I checked the reg seat and it seems to be fine and in correctly. Anybody know whats going on, im new to mags.
Classic Leak
Collapse
X
-
usualy leaking out the back impies that the rpessure is up too high try turning it down 1/4 or so
-
also, the reg piston could be bad. If the valve is old or brand new, this could be the problem. Try replacing that and see what happens.Comment
-
What are you chronoing at? Turn down your velocity a bit and see if that helps. Oil your reg assembly too.My Feedback
My Mag: Polished PF Minimag . Blade Intelliframe . Dye 03 Sticky Grips . Dye Gas Thru . 32* Flame Drop . CP on/off . CP VA . 12" Boomstick . lvl ten . Crossfire 68/30 . Empire Reloader. JT Flex 7 IZE . Raven Morphin GlovesComment
-
Also, do you have Lvl 10? I had this same problem. No matter how far I turned down the velocity I would still get venting out the back of the valve. I swapped out my long spring for a short one and the leak stopped. That was a quick fix for me. I still have to find out why it was doing that, but like I said, quick fix.It came to a point in my life when it was either pay the rent or buy paintball gear. I think I made the wise choice. If anyoneone needs me I'm livin in a van down by the river.

My Feedback:
http://www.automags.org/forums/showthread.php?s=&threadid=69554Comment
-
if you took the reg apart, then you need to replace the regseat. it will most likely leak after you have taken it apart and cause the leak out the back as you are seeing.
the fact the leaks stops when you shoot and then comes back tell me that the reg seat is leaking and not letting the regulator regulate.
if that does not solve it, then try replacing the regpiston o-ring. if that doesn't solve it, then the regpiston itself might be bad, but I wouldn't jump to the conclusion yet.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
I had a leak that stumped me for a long time, make sure you replace the reg piston o-ring.My Feedback:
http://www.automags.org/forums/showt...hreadid=129579
Recommended Traders:
PlatinumJasonComment



Comment