ULE Bodies and Rails

[Cheat71]

I am looking into buying a ULE body and intelli frame although I know the intelli will fit on a classic rail but will a ULE body fit on the stock rail? If not what is an inexpensive rail that the ULE body will fit on?

[Dayspring]

Body will fit just fine.

[Cheat71]

i know that the ule's take cocker threads so when i install my rail to my ule body should I removed the twist lock nub thing?

[Eric Cartman]

i know that the ule's take cocker threads so when i install my rail to my ule body should I removed the twist lock nub thing?

Yup. You'll have to knock out "the twist lock nub thing" :) for the ULE body to fit on the rail.

[Cheat71]

is it easy to take it off? ( the twist lock)

[Dayspring]

Turn the rail upside down.

Smack the brass piece out of the rail.

[ClouD]

hmm i had a hammer, i hit it real hard, it wont budge. any suggestions?

[Dayspring]

Bigger hammer.

[Cheat71]

if you hit it real hard wouldnt the rail crack?

[Dayspring]

Nope. It took me half an hour to dremel the damned thing. Cracking should be the least of your worries. I'd be more afraid of breaking the hammer.

A good way would be using a C-Clamp and pressing it out. Just a thought.

[ClouD]

hmm... my suggestion, dont bent ther sides of the twist lock when trying to take it out, it'll get stuck for good. also, if you hammer it on sement it damages your rail, if you do it on wood, it damages the woods, if you do it on carpet, the tiwst lock gets bent. so take it from there