How do shockers work?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • trains are bad
    Registered User
    • Oct 2003
    • 1751

    #1

    How do shockers work?

    Ok, somebody said they are closed bolt and they fit in one tube soo...

    I'm thinking like a cocker w/ a solenoid to run the pneumatics but without a hammer+valve to meter the air.


    hmmm.

    I would have considered one but got a mag b/c of the ygrip. I felt one at the shop and it's SO LIGHT but gah, the .45 frame...
    TRB's feedback
  • Thourne
    Pump Gun Aficionado
    • Feb 2002
    • 186

    #2
    The new Shockers are not true closed bolt guns. They shoot with the bolt closed, but so does every other gun out there. At rest they are in the open bolt position. Not really sure on the operation of the new shocker, but I do know it is not closed bolt despite what SP advertises.
    My Feedback

    My other gun is made of Brass!!!

    Comment

    • Krazy Ivan
      I don't do Anno,
      • May 2001
      • 600

      #3
      old shocker=closed bolt=shoebox

      new 03 shocker=open bolt=small and compact
      Once you have shot and eliminated someone, you have established your position towards them. In a sense, the next move is up to them...

      See ya in the dead box!

      Comment

      • warbeak2099
        That is my foot!
        • Jan 2004
        • 4447

        #4
        Here's how most electropneumatics (the shocker included) work:

        1) Trigger is pulled and depresses roller switch.
        2) Signal is sent from roller switch to electronic board telling the solenoid to open.
        3) Solenoid opens and lets gas move into pneumatic ram.
        4) Ram moves forward and depresses pin in the back of the valve much like a hammer.
        5) The valve opens and blah blah blah...

        Now, that's just a basic explanation. I don't know about the exact timing and parts inside a shocker, but most electropneus use some sort of system including a roller switch, electronic board and pneumatic ram. Some have LPR's to control cycling pressure (not the shocker).
        My Feedback

        Comment

        • Evil1
          Registered User
          • Nov 2003
          • 979

          #5
          The 03 shocker works almost like a cocker ram works. The trigger is pulled activating the solenoid and moving the spool valve to let air in behind the bolt to fire the ball and push the bolt forward. The spool valve then lets air to the front of the bolt to reload the next ball and fill the dump chamber. And no the shocker is not closed bolt it is open bolt. They put an oring in the breech to seal the bolt to the chamber to mimic closed bolt when the bolt is at its forward position. SP calls this slide forward technology.

          Comment

          • RRfireblade

            • Jun 2002
            • 5103

            #6


            Logic Paintball Forums
            My A O Feedback Here
            Other Feedback Here
            If I've Been Any help
            Please Leave Some. :)

            Comment

            • Joni
              Registered User
              • Nov 2003
              • 942

              #7
              RRfireblade, if I'm not mistaking, that's a matrix? However, the shocker operates rather similary.


              ULE RT Custom

              Red ULE body
              ULT
              Electric Logic vert frame

              Comment

              • RRfireblade

                • Jun 2002
                • 5103

                #8
                You are correct on both accounts.
                Logic Paintball Forums
                My A O Feedback Here
                Other Feedback Here
                If I've Been Any help
                Please Leave Some. :)

                Comment

                Working...