What loader designed to work with Intelliframe?

[BennyD]

And whats the best loader for a RTP ULE?

[Mindflux]

You could use a Revolution 12v, an eVOLUTION II or a Halo.

You'll need to sand the feedneck on the eVOLUTION or Halo... but that's pretty standard with most markers.

[BennyD]

Originally posted by Mindflux
You could use a Revolution 12v, an eVOLUTION II or a Halo.

You'll need to sand the feedneck on the eVOLUTION or Halo... but that's pretty standard with most markers.

I have a real hard time justifying $120.00 for a loader, especially when I'm not shooting electric.

[RRfireblade]

The intelliframe was designed with the Revolution in mind however you can intellifeed other loaders.

The Revy benefits from it the most though.

[White_Noise]

there is absolutely no point in trying to intellifeed a halo....it will actually slow the hopper down


and yes, the $140 i paid for my halo from www.topgeek.com is worth it even on mechs. never ever chop with my mag, never chop on my mech cocker either. but with my revy, i can easily out shoot it with both guns

[Raven4000SX]

It was made for the Revolution (the older one without X-Board). The newer ones with X-boards supposidly got rid of the delay time between balls. I just got the Ricochet Apache which spins on every ball that passes through the next with no delay. I not longer use the intellifed Revvy so I just hooked the wire from my Y-Grip to my Warp Feed. It's a lot better to intellifeed a Warp if you can.

[BennyD]

Originally posted by Raven4000SX
It was made for the Revolution (the older one without X-Board). The newer ones with X-boards supposidly got rid of the delay time between balls. I just got the Ricochet Apache which spins on every ball that passes through the next with no delay. I not longer use the intellifed Revvy so I just hooked the wire from my Y-Grip to my Warp Feed. It's a lot better to intellifeed a Warp if you can.

So essentially, what I gather, is that the intelliframe is a little outdated and no longer relaly needed with all the new loaders out there? if thats the case, what's the point of getting an intelliframe, is the trigger pull better? lighter? etc?

[Raven4000SX]

true. but it's still usefull with the Warp Feed.

[RRfireblade]

Originally posted by BennyD


So essentially, what I gather, is that the intelliframe is a little outdated and no longer relaly needed with all the new loaders out there? if thats the case, what's the point of getting an intelliframe, is the trigger pull better? lighter? etc?

Only the Intelliframe part,which is really no big deal,it's just milled for an internal switch.

Besides that it's a great frame for a Mag,it's THE AGD .45 double trigger frame and it has a blade trigger option,and comes stock on AGD's upper lever mechanical markers.

Oh, and did I mention it's made by AGD?

What's not to like?