Q-Loader to Warp Body

[adam_61550]

Just a quick question. Will the Q-Loader fit the ULE Warp Body? I'm guessing it will but just want to make sure.

[yaddatrance]

You mean around the body to hold it vertically?
If you have a stock AM/MM rail, then yes, the middle
ring works. If you have an emag/RT rail then no, the
rail is in the way. You'd have to mount it on the ASA
or someplace else.

[adam_61550]

Gotcha. I was actually worried about the feed tube on the Warp Body not accepting the Q-Loader hose as I'm not too familiar with the workings of the Warp Feed. But I guess it'll accept it.

This is basically what I have in mind:

Classic Valve
ULE Warp Body Right
Intelli
Doc's 15 Degree ASA w/ X-Chamber
Q-Loader

Should work....?

[yaddatrance]

If you have the ULE warp left, for the best fit, you will
also want to pick up the warp hose ends pieces.

[AGDlover]

u a lefty too?

[Adrenaline_Junkie]

I didnt know if you knew this already but you wont be able to mount the Q under your barrel if you use a 15* because of the angle. I had this prob, all i did was switch to my old straight adapter and it works fine. I liked the 15* a lot more but mounting the Q there is well worth using the straight one.

[adam_61550]

I kinda thought that would happen. How many other ways can you mount the Q besides on the ASA. It might seem crazy but I was thinking maybe mounting it on the feed tube Sorry, pre-Q user here.

[warbeak2099]

You could mount it coming down from the barrel vertically.