Warp problems

[Dark Master]

I have a warp feed here and i was using on my mag and the warp would not spin at all.I tryed adjusting the sensitivity and nothings been working.I just keep moving the blue thing and nothing works.Any suggestions

[CaliMagFan]

fresh batteries?... i'm not a warp genious, so thats where my suggestions stop... i'll give you an up tho.... check the all about warp feed thread for similar issues.

[AGDlover]

Re: Warp problems

Originally posted by Dark Master
I have a warp feed here and i was using on my mag and the warp would not spin at all.I tryed adjusting the sensitivity and nothings been working.I just keep moving the blue thing and nothing works.Any suggestions

have you checked the belt? open it up make shure the moter notch is on the lil notched thingy

[Dark Master]

i put fresh batts. in it before i left.

I know it spins cause when i turned it on it spins.Plus when it does spin,the l.e.d comes on,and it never came on.

[lamby]

LED? you have a modified warp. Who did the mod? there might be a electrical problem in addition to the ones above.

Does the white button make it spin?

[Dark Master]

I got the warp from snertz,he lives right near me but hes in florida now.Ill talk to him about it when he gets back.

When i do push the white button,it does spin.

[deadeye9]

Is it an AGD or PTP warp feed? An AGD will have a sensor:



If it does have a sensor, you need to see if has the warp contact springs:



If it does not have a sensor, you'll need the external sensor available from PTP:

[Dark Master]

it is a Pro team warp,and yes it has a external sensor.

[ghideon]

Does it have a 12v mod?

I got mine used, and the guy before had done a 12v mod. Problem was, he didn't put some capacitors in-line with the mod, and it refused to spin on fresh batteries. Older batteries it would spin fine. For now, I've put it back to 9v stock, and it works great.

[Dark Master]

it has the 12vt mod and i even tryed it on his emag with the mod and it worked fine

[lamby]

there is a jumper in the warp that enables the sensor.. I do not know which one it is off hand and I am at work so I can not help right now but you need to have this jumper in to make the warp spin unless you intelifeed it.