Rex raptor tank question

[Chowee21]

I have a 68/45 rex raptor tank thats adjustable.
i havent gased it up, but i have a few questions

is the end part a on/off type valve
wat are the 2 allen wrench srews on top for, and how do i adjust it

[laxkid]

I wouldnt say an on/off valve it is really just adjustable if you try to unscrew it it might blow off hence not an on/off to adjust it stick an allen wrench in the front allen wrench hole lefty loosey(lowers the psi input) righty tighty( makes it higher psi input watch it though it is adjustable to 1500 psi) also if you dont have an input psi gauge I recomend getting one.

[Chowee21]

i have a psi output gauge and it just has 3 wrench holes, one onthe tip (kinda acts like an on/off) and 2 on top looks like this



safety
(wrench holes--> O low
O high

[laxkid]

is it just like the 3k raptor rex I have had the 4500

[Chowee21]

im not sure, i havent seen a 3k, but i know that they dont have like the gauge or somthin like that

[laxkid]

if you have photo shop or paint or some other form of picture editing go to here http://www.airamerica.com/store/prod...products_id=33 copy the large pic and circle the allen holes in a nice bright color

[laxkid]

the one on the tip that you said looks like an on/off is the adjuster

[Chowee21]

ok kool, wat about the other 2 on the oppisite side of the main gauge

[kdawg]

you should be able to get most of your answers in the manual: http://www.airamerica.com/manuals/raptormanual.pdf

www.airamerica.com/support for all their support items.