3.2 software usage question

[Flossabe]

I just got my emag back from AGD with a sweet pewter X-valve and the 3.2 software up grade, im used to 1.37 so whats the adjustment on the shot buffering and best way to set it?

[Dayspring]

The lower the setting, the faster the gun.

Keep in mind, the lower you are, the more bounce you can get. On E mode, it doesn't matter that much. I ran mine in 4.

In Hybrid, however, you need to run significantly higher b/c it'll REALLY bounce. Try something like 20.

Keep in mind, the magnetic sensors are all different, so what mine likes and what yours likes can be different.


Experiment. :)

[cugo30]

I Am A Noob!!!!!!!!!

I've got my new to me emag with the AGD 3.2 . What dose the setting SHBF stan for? It's set at 4 and it go's up to 100.

[robertjuric]

I dont' have an emag, so don't quote me on this, but it sounds to me like SHBF stands for Shot Buffering. But I cant be certain.

[Flossabe]

3.2 shot buffering

Thanks Dayspring

[Bonx0007]

how long did it take to get your 3.2 done?
I mean from mailing it out to getting it back.
Did you notice a big difference from 1.37?
Is the software stable?Meaning no double shots or weird unexplainable behavior???? Do you recomend this upgrade or should I stick with 1.37?

[Flossabe]

3.2

Definently go to 3.2, the rate of fire alone is 4 bps faster not to mention the shot buffering wich in short evenly spaces the shots to 1/20th or 1/14th or what ever your cap ROF is, there is more to it than that but that is basicly shot buffering. It was $20 and I alos had other things done to my gun like an x-valve and AGD tuning my lvl 10 and they went through it and checked it out and that was 2.5 weeks.

[Evil1]

The 3.2 software is much faster and more reliable than 1.37. When I had 1.37 on my emag, I thought it was kind of fast, but everyone elses guns were way faster. 3.2 is definitely worth it.

[Bonx0007]

i know exactly what you mean

[Mechanic79]

Emag Trigger Adjustment

I too have an Emag with Software 3.2

I have the tigger adjusted so there's minimal travel. a tiny bit more than a mouse click distance at the magnet.
I have 1-magnet and 1-oring under the magnet for a light pull.
I have the SHB set at 4. and I tried it at 24, no noticeable difference
BPS is 20

I still can't shoot this thing that fast very easy.
I can shoot my RT PRO just short of the emag. I can't out shoot my Ricohcet 2k that's for sure.
I used a timmy for two quick games and could shoot that thing fast easily. Don't know what board or mode it was set up on but the trigger felt very positve, right on everytime. The emag trigger seems more hit or miss. sometimes on mostly off.

How should I adjust my software/trigger to allow shooting fast easy?
I've tried walking and can get consistent strings but if I go a little faster it's like the trigger doesn't register.

Please help. Thanks

[Mechanic79]

Up

No one knows? everyones Emag/Xmags works just fine?

[ghideon]

For me the shotbuffer setting doesn't make any difference shooting in E mode. I used to shoot in Hybrid (had 1.37), and was kinda slow. Switched over to E mode only, and was able to outshoot my Ricochet AK.

With the new 3.2 software I can outshoot the hopper a little easier in E mode. I have one magnet (no o rings or spacers), and a small pull (not very small). For me, it's easier to shoot with one magnet than it is using one magnet and an oring. I prefer a crisper pull that the one magnet is able to give me.

[Flossabe]

trigger

Try opening up your trigger pull length either the back stop or the fore sotp, try one then the other, and mabye you just arent cut out for a mag trigger, i have some frieds with angles and I cant realy walk thoes over 15 but 20 is no problem with my mag, and just the oppisite for them, they cant realy shoot my mag fast.

[durtysoufcraka]

is there already a large thread on how to adjust your emag trigger? i just got it and do not know how to adjust that beast.

[Mechanic79]

Adjustment of E-mag Trigger

is there already a large thread on how to adjust your emag trigger? i just got it and do not know how to adjust that beast.

http://www.automags.org/forums/showthread.php?t=83104

Everything you'd want to know.