no fire after sitting for 15 min , first shot puffs

[Chingis]

auto rook , i think you can stay off my thread now.( i would delete it but others are being helped by it.)
go post your own thread all i wanted was the more complete info
rather then its leaking out of the whole (spelt wrong) and out of the back

and im sure name calling is going to get you lots of help.

if your gonna post something like that please do it on your own thread.

[Auto_Rook]

Sorry. I apologize to everyone in this thread, and could i please have help on my leaking out the wholes in the back of my v valve?

[phyregod]

my mag is doing the same thing, but through some stupid cousin circumstances it was gassed up for a week. It started directly after that incident. (I'm talking the "won't shoot after 15 minutes" thing.) I relpaced the on/off thinking it might have been that. I'm sure it's not the carrier or the O ring or the spring because its the same parts that have been in there for the last 20 cases of paint. I'll try the reg inspect/lube and see if that fixes it.

[Chingis]

i went down to the smaller spring and that stoped the " no fire after 15 min " problem

but now after taking it on the field and shooting a case of paint i have a new problem.
im running smallest spring 1 line 1 dot carrier, 3 shims , now it double fires almost every time and is Super reactive, while its fun to scare the other team with the full auto , i seem to break balls in the barrel , at the end of it.
and have a hard time being accurate.
if my thinking is right , i should remove a shim or 2 correct?
thanks for any help.

[athomas]

Check the tip of your sear. If it shows signs of wear, it may need to be replaced.


Auto_Rook: Take your valve apart into two halves. Clean the excess oil off the halves. Put the valve together and air it up. The leak should be gone.

[Chingis]

sear is brand new only a case on it
, heck gun is pretty much new prob only 7-8 cases max threw it