"Roller Trigger 2 beta"

[Halliday]

You're right, you are missing something. With the roller trigger all you have to do is wiggle your finger up and down to shoot.

[Zneaky]

Why dont we put a hand crank attached to a cam and pedal fire the triger, it would be like a gatlan gun?

[BlackHalo]

Grinder

Why dont we put a hand crank attached to a cam and pedal fire the triger, it would be like a gatlan gun?

Triple your pleasure, triple your fun -

high bandwidth

http://www.palmer-pursuit.com/animation/Speedball-Grinder-hr.wmv

low bandwidth

http://www.palmer-pursuit.com/animation/Speedball-Grinder-lr.wmv

[Halliday]

Triple your pleasure, triple your fun -

high bandwidth

http://www.palmer-pursuit.com/animation/Speedball-Grinder-hr.wmv

low bandwidth
http://www.palmer-pursuit.com/animat...Grinder-lr.wmv

Could they have shot that video from a little further away, like from orbit? Nice sound thou with the Gatling-Gun shooting.

[SpecialBlend2786]

haha, those vids are awesome

[Chronobreak]

update? are you just making one for yourself or you gona be selling some cause if you are put me on the lsit for one

[Flossabe]

roller trigger

I will be selling them, however I have to leave for work for about 4 months so it will be a while before I can get any of them out but when I get back it shouldent take but a day or two to complete each one, I can install them in any trigger but I will have a website up with all of the info and an order form sory guys for the wait.

[Chronobreak]

wow 4 months is pretty steep im hoping i can find someone else to make them maybe...the hair wil prob be out by the time your done..

[mark_426]

up for you.. but not without some hassle :)

1. Are you doing a screw on one side, or an axle the whole way through? - edit, i see its through, how are you holding it in? is it removeable? Could you use one screw that goes through one side and the bearing?
Ex:
. ___ .
l | . | |
l |/////l
l |__| |

2. How do the magnets/set screw fit with an emag trigger?

3. Have you shot it yet?

4. And it does look neat and clean (good job), but, what size is the bearing? As well as the width?

[Target Practice]

Looks good. It's pretty much frictionless, isn't it?

[Flossabe]

Roller trigger 2 beta

Ok everybody I came back home for a little bit and got this thing finished, I think it works great, you can pull off long constant strings realy easy at 20bps no problem. Extremley smooth, a must for those people who have a problem walking fast, I will be able to put it on any trigger TL-3, TL-68, Stock emag, whatever, I have only tried it on the stock hump trigger but I may do it to my TL-63 and see what comes of it, I will be selling them, either as a service $38.00 or as a new product $75.00, price is such becouse of the price of the roller bearing and the 2mm pin i have to use, i am still looking for cheaper places to get the matereal but that is waht is is now, This is a permanant adition removeable only by drilling out the epoxy that holds the pin in. One note, you will not be able to adjust your HES magnet because there is not room for the adj. screw and the roller bearing. I will have a video up soon, mabye tonight. I will have to leave out again soon and I only have 2 more bearings so if you want one soon (before september) let me know imeaditly and we can get to work on it.

Let me know what you all think.

[bunkerhugger]

Looks way cool. Let me know when they become available.

[Halliday]

PM sent.

[Flossabe]

Roller trigger 2 beta

They are avilable now but I can only make 2 for now, as I have to leave for work, but within the next week or so I can do them, allready have one inquary waiting for a foresure response from Halliday, any one else just PM me.

[Halliday]

Pretty close to yes here, but a question.
I only have one HES trigger magnet and it's currently being used. Will that affect the installation of the roller? Can I put in a magnet later? I do have a spare loose magnet. Would that help?