Air leak
I'm sure that this is a simple fix but i can't find any dealers in my area that know how to fix my air leak in my emag. the leak sounds like it's coming from inside the valve or out the back of the valve. I can adjust the velocity and minimize the leak to some extent but i can still feel the leak if i put my finger over the adjustment hole. For some odd reason messing with the tightness of the field strip screw also minimizes the leak (but doesn't eliminate it). It's gotten progressively worse which leads me to think that it's one of the o-rings, but which one? Just a note, I have an AGD installed lvl 10 on the marker as well (if that makes a difference). Thanks.
-
-
well you can try really oiling all the orings on the reg valve pin if you know which pin im talking about, its the long one with the little spring deal and the cylinder o-ring on it. Or it might need a new reg seat or just a little oil on the reg seat. But if its the on/off then you'll need to oil all the orings in there or get new ones... hope i helped a tiny bit.
Comment