Couple Questions

[p8intballer777]

I was wanting to build a custom mag, but then I would have to find everything and this would be my first mag. So My plans where

Ygrip
lvl10
ule body
dye ultralite
x valve

What gun can i get that i can put all of these parts on? Or am I just better off building from scratch? I mean if i get a whole gun I will just change out everything on it.

[Tunaman]

I can build you that marker no problem. Email me.

[Tunaman]

I can build you that marker no problem. Email me.

[mobius]

You can also buy that direct from AGD, and it would be cheaper than buying all the parts separately. It would be $477 for a ULE body, X-valve, Y-frame, ULE trigger kit, LVL 10, and no barrel. Plus, it all comes assembled and tuned. It doesn't get much better than that.

[p8intballer777]

So how many bps will I be hitting with this? So I know what hopper to buy. Thanks

[mobius]

BPS really depends on your finger control. I've seen guys with Walmart guns outshoot guys with nicer electros b/c the electro guy had poor finger control. As for capability of the gun itself, with a ULE trigger, 8-12 BPS is probably realistic. Therefore, a Revvy or similar will do just fine. A Halo would be overkill. Plus, with the Revvy and the Y-frame, you can intellifeed it, so it feeds on every shot.

[chasden]

WARPIG has a great by-the-numbers tutorial on how to build a Custom Mag:

Building an ULE Automag, Part I

http://www.warpig.com/paintball/technical/paintguns/automag/ulemag/index.shtml

Building an ULE Automag, Part II

http://www.warpig.com/paintball/technical/paintguns/automag/ulemag/index2.shtml

[Remake101]

I would say buy a Custom ULE RT direct from the factory. You can get all that stuff plus more. With every upgrade and shipping my friends came out to about $700. That was with a nitro tank and a hopper. he already has a freak with cocker threads. Most people that just start with a ULE RT get about 12-16 bps in the beginning. With the right upgrades you can get up to 23 bps. With my mag which is below i can somtimes cap 20 bps but thats only if im shooting really well. In the beginning you should do just fine with a revy but if you get good enough you might need to get a halo :) you could just get a halo from the get go, but thats up to you.

[tmnothing]

Definetely just buy it already assembled. Before AGD dropped the floor from the RT prices I bought all of the parts and assembled one myself. It is a really kickin mag and a solid mech backup but i definetely paid alot for it, more than I'll ever get out of it and more than you'll pay for one assembled by the techs at agd. I had a 12v revvie on my rt for as long as I used it and RARELY outshot it, probably only once or twice. It is very hard to walk a mech mag even with the ult (for me at least) so the revvie was always plenty.

[p8intballer777]

What would I get higher rates of fire on the y frip or the intelliframe?

[tmnothing]

That's a question of personal preference. try to imagine what would be more comfortable for you holding the gun. see how you hold your current gun and if the y-grip angle would be more comfortable to you go with that. As far as actual capabilities i believe they are exactly the same except for the angle of the grip.