ULT problem

[Plazmic]

I posted this in the ULT thread but I'm not getting any responses so I thought I'd bring it out here.

I have a ULE Mag with X-valve and intelliframe. It works perfectly with the original on/off, but when I put the ULT in, I get what seems to be shoot down in even slow streams of 5 to 7 BPS (don't get it with the regular X-valve on/off), and then a chuff, and occaisionally my bolt will not reset and I have to push it back. I've get 5 ULT shims in. My tank is an 88/4500 that is putting out 950psi. I can rip off pretty high BPS with the original x-valve on/off but with the ULT it seems like I run out of air or something.

I thought maybe the pin in the ULT was sticking, so I took the ULT apart and oiled the crap out of it. That didn't seem to help.

Please, someone give me an idea what direction to go, here.

[RTC_LoKi]

Try takin out a shim or 2 because mine did that when i had 5 but now im usin 4 and its perfect.

[Plazmic]

Oh man. I'm an idiot. I totally had that backwards! I was thinking that the fewer shims you have the more likely you are to chuff! I was ADDING shims!

Okay, so I'm at 3 shims and this baby rocks!

Thanks for turning me around, bud!

Woohoo!!

[RTC_LoKi]

:) no problems