grrr .. this leak has been plaguing me forever!! First thing, I got my AGD certs at the supertour back in 2001 so I'd like to say I know what i'm doing with a mag. I have owned my mag for 9 years continually upgrading it. I just can't get this issue resolved!!!!
Okay, so now for the problem:
RTPro valve, on/off drilled out, ULT kit, lvl 10 kit, SS PF body tube, docs cocker thread adapter, brand new AM stock rail, hyperframe (also tried with dye 2 finder frame). 2 shims in the ULT kit, 1.0 carrier w 0 shims in the power tube (used to have 2.0 carrier w 2 shims, same leak).
So I started out with 2.0 carrier w 2 shims .. gass up my marker, and it worked fine. THEN I would go outside (cold outside) and I would gass up to a minor leak down the barrel. I changed the carrier to 0.5, no shims, still same leak (currently it has 1.0 w 0 shims, same leak). I would go back into the house (warm) and it would shoot fine, no leak.
GAH!!!!!!!!
So every time I try to play a tourney .. I set up the marker great in my room .. then get to the event only to have to use someone elses marker ... I'm to the point where I want to throw this thing in the river
If someone can't help me soon .. i swear it! :P
Anyhow .. back to the point. I push on the lvl 10 bolt with dowel, and I hear the pitch change but someone told me that if you do that it will leak no matter what. I have changed out everything in the power tube, so what else can I do to fix this?
Can anyone help me? I have been struggling with this for about 6 months and i'm at the end .. i really am almost ready to sell it and buy something else
Thanks in advance for your help .. and I really dun wanna spend money to have someone fix this only to get it back and have it do it again when it's taken outside into the cold
Okay, so now for the problem:
RTPro valve, on/off drilled out, ULT kit, lvl 10 kit, SS PF body tube, docs cocker thread adapter, brand new AM stock rail, hyperframe (also tried with dye 2 finder frame). 2 shims in the ULT kit, 1.0 carrier w 0 shims in the power tube (used to have 2.0 carrier w 2 shims, same leak).
So I started out with 2.0 carrier w 2 shims .. gass up my marker, and it worked fine. THEN I would go outside (cold outside) and I would gass up to a minor leak down the barrel. I changed the carrier to 0.5, no shims, still same leak (currently it has 1.0 w 0 shims, same leak). I would go back into the house (warm) and it would shoot fine, no leak.
GAH!!!!!!!!
So every time I try to play a tourney .. I set up the marker great in my room .. then get to the event only to have to use someone elses marker ... I'm to the point where I want to throw this thing in the river
If someone can't help me soon .. i swear it! :P
Anyhow .. back to the point. I push on the lvl 10 bolt with dowel, and I hear the pitch change but someone told me that if you do that it will leak no matter what. I have changed out everything in the power tube, so what else can I do to fix this?
Can anyone help me? I have been struggling with this for about 6 months and i'm at the end .. i really am almost ready to sell it and buy something else
Thanks in advance for your help .. and I really dun wanna spend money to have someone fix this only to get it back and have it do it again when it's taken outside into the cold
Comment