Level 10 Odd Problem

[jsmz27]

HEY PEEPS.

Im having trouble with the paint feeding into the barrel. It doesn't matter what barrel I put in the paint has to be manually pushed through the power feed. The gun has a level 10 kit in it and other than that no mods. Also is the level 10 supposed to be a gas hog. I dont have any leaks and the gun shoots at a very consistent velocity when the paint feeds. Any help would greatly be appreciated.

[Chronobreak]

is the powerfeed in too far? try backing it out a bit

[athomas]

Check that the barrel hole is lining up with the hole in the body. Try dropping some balls in manually without the powerfeed plug in place. They should fall right in if the barrel is lined up properly.

[68_Classic]

try a smaller paint maybe the paint your using is too big for the barrel...

[50 cal]

What kind of gun is it? I had a MicroMag that the powerfeed came loose and did the same thing.

[bitter being]

I had the same problem when i got my mag... I soon found that it was the PF plug. Try pulling it out just a wee bit. It worked for me.